Key Features
- 50 engine hp
- Best-in-class visibility
- Thick comfortable seat
- 5-Year Powertrain Warranty
Features
Adding ease to operation
Enhanced operator controls
Operator comfort is important regardless of the application. Improving the 5E 3-Cylinder Tractor models, the hand throttle has been relocated to the right-hand console. This is 30.5 cm (12-in.) closer to the operator and within easy reach versus the previous location on the center-hand console. Operators may also notice the additional legroom provided by the repositioned loader controls, providing a more enjoyable experience.
Nine forward and three reverse speeds with in-line synchronized shuttle shifting
The SyncShuttle transmission is designed to match the excellent power and torque characteristics of the John Deere PowerTech™ engines. Transmission durability is enhanced with the pressure-lubricated top shaft, allowing an operator to achieve performance from one working season to the next. Additionally, this in-base transmission is configured with fixed draft links, single-speed power take-off (PTO) and mechanical PTO engagement.
The transmission is characterized as full top shaft synchronized (TSS) when forward shifting on-the-go between speeds, and is characterized a synchronized while depressing the clutch.
| 2100 engine rpm | ||
| 16.9-28 | ||
| Tire | 0.671 RR | |
| Gear | Rear Wheel Speed | Ground Speed |
| rpm | km/h | |
| A1 | 9.1 | 2.3 |
| A2 | 12.4 | 3.1 |
| A3 | 17.0 | 4.3 |
| A Rev | -13.5 | -3.4 |
| B1 | 23.1 | 5.8 |
| B2 | 31.4 | 7.9 |
| B3 | 43.2 | 10.9 |
| B Rev | -34.2 | -8.6 |
| C1 | 58.9 | 14.9 |
| C2 | 80.3 | 20.3 |
| C3 | 110.3 | 27.9 |
| C Rev | -87.3 | -22.1 |
Creeper available for R2 and R4 as field installed kit with following speeds in km/h.
| Creeper 1 | 0.40 |
| Creeper 2 | 0.54 |
| Creeper 3 | 0.75 |
| Creeper Rev | -0.59 |
Easy and comfortable shifting
Operator-friendly transmission controls with hand throttle
Synchronized shifting in all forward and reverse gears
Range selection pattern
Nine forward and three reverse (9F/3R) speeds are achieved by using two platform-mounted levers for shift operation. The gear lever at the operator's right hand selects one of three forward gears and one reverse gear, as well as the integrated park position. The range lever at the operator's left hand selects collar-shift A, B, and C ranges.
Operators can easily switch directions without having to completely stop the tractor with synchronized, in-line, shuttle-shift capability between forward and reverse gears on the gear-shift lever in all three ranges (A, B, and C ranges).
A neutral start switch requires the gear-shift lever be in the neutral or park positions to start the engine.
A positive park pawl on the transmission provides positive park and eliminates the need for a hand brake. This also eliminates clutch service costs that occur when the park brake is accidentally left engaged.
Key Specs
| Engine description | John Deere PowerTech 3029 |
| Engine displacement | 3 cylinders: 2.9 L 179 cu in. |
| Rated engine power | At 2100 rpm: 37.4 kW 50 hp |
| Rated PTO power (hp SAE) | At 2100 rpm: 27.6 kW (37 PTO) |
| Maximum PTO power | @ 1800 RPM Open Station: 28.5kw (38hp) |
| Transmission type | Standard: 9F/3R SyncShuttle |
| Hydraulic pump rated output | Standard: 66.1 L/min 17.5 gpm |
| Rear hitch category (SAE designation) | Category 2; convertible to 1 |
| Base machine weight | |
| Maximum engine power |
Engine specifications
| Description | John Deere PowerTech 3029 |
| Engine type | |
| Engine family | |
| Rated speed | |
| Aspiration | Turbocharged |
| Cylinders liners | Wet sleeved |
| Emission level | |
| After treatment type | |
| Displacement | 3 cylinders: 2.9 L 179 cu in. |
Engine performance
| Rated power | At 2100 rpm: 37.4 kW 50 hp |
| Rated PTO power (hp SAE) | At 2100 rpm: 27.6 kW (37 PTO) |
| Maximum PTO power | @ 1800 RPM: Open Station - 28.5kw (38hp) |
| Power boost | |
| Engine peak torque | |
| PTO torque rise | |
| Intelligent Power Management (available in transport and/or mobile PTO applications) | |
| Maximum engine power |
Transmission
| Type | Standard: 9F/3R SyncShuttle |
| Reverser | No |
| Clutch; wet/dry | Dry |
| Creeper |
Hydraulic system
| Type | Open Center |
| Pump rated output | Standard: 66.1 L/min 17.5 gpm |
| Available flow at a single rear SCV | 43.4 L/min 11.5 gpm |
| Available flow at front SCVs | |
| Number of rear selective control valves (SCVs) | standard: 1 Optional: 2 |
| Number of mid selective control valves (SCVs) | Standard: 0 Optional: 2 |
| Number of front selective control valves (SCVs) | |
| Joystick SCV control | 2WD: FIK MFWD: Standard |
| SCV control |
Rear hitch
| Hitch draft control load sense type | Mechanical |
| Remote control valves available | Standard: 1 Optional: 2 |
| Hitch category (SAE designation) | Category 2; convertible to 1 |
| Maximum lift capacity behind lift points | OECD hitch lift cap at 24 behind: 3192 lb 1448 kg |
| Sensing type | Top link |
| Rear axle differential lock | |
| Lift capacity at standard frame |
Drawbar
| Drawbar category | |
| Maximum vertical load |
Rear power take-off (PTO)
| Type | Standard: Independent 540 |
| Engine rpm (at rated PTO speeds) | 540 at 2100 rpm |
| PTO actuation | Mechanical (lever) |
| Ground speed PTO option availability | |
| Multispeed PTO option availability |
Front hitch
| Category | |
| Electric power | |
| Standard lift capacity | |
| Front power take-off (PTO) | |
| PTO speed |
Rear axle
| Type | |
| Final drive type | Planetary |
| Differential controls | Mechanical (pedal) |
| Axle type | Flanged |
| Brakes, type and control | Hydraulic wet disc |
| Rear differential lock | |
| Load rating |
Front axle
| Type | |
| Front axle differential lock | |
| Load rating |
Tires
| Front | 2WD: 7.5-16 R1 MFWD: 9.5-24 R1 |
| Rear | 2WD: 13.6-28 R1 MFWD: 13.6-28 R1 |
| Wheel tread range | |
| Turning radius with brakes | 2WD: 3.1 m 10.2 ft MFWD: 3.94 m 12.9 ft |
| Turning radius without brakes | 2WD: 3.5 m 11.5 ft MFWD: 4.65 m 15.3 ft |
Steering
| Type |
Electrical system
| Alternator size | |
| Battery options | |
| Total cold cranking amps | |
| Type of bulb in beacon (Halogen, Zenon, LED) | |
| Type of bulb in headlight (Halogen, Zenon, LED) | |
| Working lights | |
| dB(A) rating for backup alarm |
Operator station
| Rollover protective structure, OOS | Rigid - foldable - telescopic Foldable, 2-post Platform - flat/straddle Straddle Gearshift location - console/floor Floor, on the side |
| Seat | Mechanical |
| Cab suspension | |
| Instructional seat | |
| Display | |
| Radio | |
| Inner cab volume | |
| dB(A) rating | |
| Cab glass area | |
| Front visibility | |
| Safety glass rating |
Dimensions
| Wheelbase | 2WD and MFWD: 2050 mm 80.7 in. |
| Overall length | 3639 mm 143.3 in. |
| Drawbar clearance | |
| Front axle center | |
| Approximate shipping weight, Open;Cab | MFWD: 2525 kg 5566 lb |
| Overall height |
Weight
| Base machine weight | |
| Maximum ballast level | |
| Maximum permissible weight |
Capacities
| Crankcase oil volume | |
| Fuel tank | Standard: 72.5 L 19 U.S. gal. |
| Diesel exhaust fluid (DEF) tank | |
| Cooling system | |
| Transmission-hydraulic system |
Serviceability
| Interval for engine oil change | |
| Interval for hydraulic/transmission oil change | |
| Interval for engine coolant change |
Loaders
| Loader | |
| Lift capacity at full height | |
| Maximum lift height |
Precision AG
| Guidance | |
| Telematic | |
| Remote diagnostics |
Miscellaneous
| Country of manufacture | Sub assembly in Pune, India, Final assembly in Augusta, GA |
| Side slope rating | |
| Uphill/downhill slope rating |
Additional information
| Date collected |
Tracks
| Drive type | |
| Midrollers | |
| Track width | |
| Tread spacing |
