New RR23 Series Rotary Rakes

Cam-action tine arms for efficient drying time

The cam-action tine arms on the RR23 Series Rotary Rakes gently deposit the material in the windrow, saving valuable leaves.

Furthermore, the cam action forms a higher, fluffier, faster-drying windrow that saves drying time.

The tine arms are removable to allow for narrow transport widths and more compact storage.

Hydraulics allow adjustments from tractor seat

Adjust pitch of rake tines with hand crank

Hydraulically raise and lower the RR23 Series Rotary Rake without leaving the tractor seat.

Easily adjust the pitch of the rake tines with the hand crank. 

Adjustments are easy

The RR23 Series Rotary Rakes have rugged 13-arm rotors featuring an adjustable cam.

This allows the operator to change the aggressiveness of the tines to the crop conditions – more aggressive for wet crops and less aggressive for delicate crops like alfalfa.

Flotation tires provide top-quality performance

Four large tandem flotation tires on the RR2313 Rotary Rake provide maximum durability when operating over rough terrain.

Tandem walking beam axles on both RR23 Series Rotary Rakes provide a smooth ride over rough terrain and follow ground contours, allowing for proper crop pickup.

Swath curtain controls windrow formation

Adjustable to accommodate raking needs

The Frontier™ RR23 Series Rotary Rake swath curtain controls the windrow formation in varying crops. It can be adjusted in or out to accommodate individual harvesting needs.

When combining multiple windrows with the RR2324, the curtain can either be removed or turned upside down to prevent interfering with the hay.

Quickly and easily adjust rear swath curtain

The hydraulically adjustable swath curtain is standard on the rear rotor of the RR2324 Rotary Rake.

It easily adjusts for proper windrow formation in varying crop conditions.

Single windrow

Dual windrow

The RR2324 Rotary Rake is more versatile because it has two rotors, allowing it to rake one large windrow or two smaller windrows in a single pass.

NOTE: Includes two additional flotation tires and two spindles per rotor mounted to the front of each walking beam.