Key Features
- Adjustable head height
- Plastic teeth prevent metal debris
- Tail wheel works in uneven fields
- Hydraulic aftermarket kits
Features
HM11 Series Hay Merger adjustable head
Reposition two pins to change the head height of the Frontier™ HM11 Series Hay Merger for optimal performance in changing conditions. Adjustable gauge wheels allow the head to float from side to side.
HM11 Series Hay Merger quick-disconnect hoses
The Frontier™ HM11 Series Hay Merger is equipped with quick-disconnect hoses that allow operators to switch between left- and right-side merging.
HM11 Series Hay Merger's plastic teeth
The Frontier™ HM11 Series Hay Merger features replaceable pickup teeth that prevent metal from entering the crop. The pickup teeth are made from durable plastic.
HM11 Series tail wheel
A brake assembly on the rear swivel tail wheel of the Frontier™ HM11 Series Hay Merger keeps the merger steady while working in uneven fields or during transport.
Field conversion kits are available for conveyor extensions for the conveyor cross belt. These kits improve windrow placement.
The first conversion kit listed actuates the BU1060 Bale Unroller. A hydraulic cylinder, hoses, and fittings are needed to actuate the squeeze feature of the bale unroller.
The second conversion kit listed is a hydraulic lift mechanism to fold the DM1140 Disc Mower for transport. This is standard equipment on all DM1140 Disc Mowers.
The third conversion kit listed is a power take-off (PTO) hydraulic drive for the HM1109 Hay Merger. It is a self-contained hydraulic system used to operate the merger if the tractor's hydraulic system has insufficient capacity.
The optional accelerator roller fluffs windrows and allows the operator to merge up to 4.3-m (14-ft) cuts of hay or create windrows up to 2.7-m (9-ft) apart.
The below kit is windrow inverter kit for HM1109, HM1209 and HM1212 Hay Mergers.
The purpose of this field conversion kit is to reverse the cross conveyor on the hay merger in order to invert the windrow for drying. It places crop that is on the ground on top of the windrow for improved drying time.
Dimensions
| Conveyor width | 107 cm 42 in. |
| Pick-up width | 2.7 m 9 ft |
| Base unit width | With optional accelerator roller 4.8 m 15.75 ftWith optional 2-ft conveyor extension (fixed) 5 m 16.3 ft 4.36 m 14.3 ft |
| Base unit height | 1.37 m 4.5 ft |
| Base unit length | 5.9 m 19.25 ft |
Weight
| Standard base unit | 1,347 kg 2,970 lb |
| Self-contained base unit | 1,533 kg 3,380 lb |
Tire size
| Frame | Two, 17x38 cm 6.70x15 in. |
| Pickup | Two, 14.5x20 cm 5.70x8 in. |
Tractor compatibility
| Standard unit | Minimum PTO power 52 kW 70 hpMinimum hydraulic flow 61 L/min 16 gpmMinimum hydraulic pressure 13,790 kPa 2,000 psiTractor SCVs required Two |
| Self-contained unit | Minimum PTO power 52 kW 70 hpMinimum hydraulic flow 19 L/min 5 gpmMinimum hydraulic pressure 13,790 kPa 2,000 psiTractor SCVs required One |
Hitch
| Type | Pull |
Lights and safety
| Transport lights | Standard |
| SMV | Standard |
| Safety tow chain | Standard |
| Transport locks | Standard |
Set-up time
| Standard unit labor hours | 1.5 |
| Self-contained unit labor hours | 2 |
Warranty
| Time period | 1 year |
Additional information
| Date collected |
